Unit Descriptor

Performance Criteria

1.2

Hazard control measures are identified consistent with appropriate standards to ensure the safety of personnel and equipment.

1.4

 Crane is appropriate to the load/s and workplace conditions.

1.5

The appropriate path for the movement of loads in the work area is inspected and determined.

1.6

Appropriate communication methods are identified with associated personnel.

2.1

Crane is visually checked for any damage or defects.

2.2

Crane is accessed in a safe manner.

2.3

All signage and labels are visible and legible according to the appropriate standard.

2.4

Routine pre-operational crane checks are carried out according to procedures.

2.5

All controls are located and identified.

2.6

Crane service logbook is checked for compliance.

2.7

Crane is started according to procedures and checked for any abnormal noises.

2.8

All crane safety devices are tested according to procedures.

2.9

Pos-start operational checks are carried out according to procedures.

2.10

All communication equipment is checked for serviceability.

2.11

All damage and defects are reported and recorded according to procedures, and appropriate action is taken.

3.1

Ground suitability is checked.

3.2

Crane is driven to the work area according to procedures.

3.3

Crane is positioned for work application and stability according to procedures.

3.4

Appropriate crane configuration for work task is determined according to procedures (where applicable).

3.5

Boom/jib and counterweight configuration data is input into the crane computer (where applicable).

3.6

Appropriate hazard prevention/control measures are applied to the work area according to procedures.

3.7

All communications equipment is tested for functionality.

4.1

Lifts are determined within the capacity of the crane.

4.2

Boom/jib and hoist block is positioned over load following directions from associated personnel.

4.3

Test lift is carried out according to procedures.

4.4

Loads are transferred using all relevant crane movements according to procedures and the appropriate standard.

4.5

All required communication signals are correctly interpreted according to procedures and the appropriate standard.

Crane is operated according to procedures.

4.7

Load movement is monitored constantly ensuring safety to personnel and load, and crane stability.

4.8

Unplanned and/or unsafe situations are responded to in line with procedures.

5.1

Suitability of planned route is checked for the crane according to procedures.

5.3

Load is moved using best mobile practice according to the appropriate standard.

6.1

Crane boom/jib and equipment is stowed and secured, where appropriate, according to procedures and the appropriate standard.

6.3

Outriggers/stabilisers are stowed and secured according to procedures (where applicable).

6.4

Crane is shut down according to procedures.

6.6

Plates or packing are stowed and secured (where applicable).