Advanced Rigging

CPCCLRG4001A Licence to perform rigging advanced level – Duration 3 Days

Pre-requisite:  CPCCLRG3002A Licence to perform rigging intermediate level

HRW associated with the suspension of a suspended scaffold, including rigging the temporary hoist to the SWP or suspension point and the setup of the secondary protective device, requires an advance rigging licence.

NOTE: The holder of an advanced scaffolding licence can also install a suspended scaffold providing no equalising gear is required.

An Advanced Rigging Learner’s Workbook  must be completed prior to the course.  Allow a minimum of 1 week prior to the course date to ensure you receive the Advanced Rigging Learner’s Workbook in time for you to be able to complete it.

Unit descriptor This unit CPCCLRG4001A Licence to perform rigging advanced level specifies the outcomes required to perform rigging work at the advanced level, which includes all the outcomes for rigging work at the basic and intermediate levels, and also includes rigging of gin poles and shear legs, flying foxes and cable ways, guyed derricks and structures, and suspended scaffolds and fabricated hung scaffolds for licensing purposes.

 

ELEMENT PERFORMANCE CRITERIA
1.   Plan job. 1.1. Task to be undertaken is assessed.1.2. Potential workplace hazards are identified.1.3. Hazard control measures are identified consistent with appropriate standards to ensure the safety of personnel and equipment.1.4. Site information is obtained.1.5. All forces and loads associated with erecting and dismantling associated plant are considered in consultation with appropriate personnel.1.6. Rigging equipment and associated equipment are identified in consultation with appropriate personnel according to procedures and site information.1.7. Safety equipment is identified.1.8. Appropriate communication methods are identified with appropriate personnel.
2.   Select and inspect equipment. 2.1. Rigging equipment and associated equipment are selected and inspected according to procedures and the appropriate standard.2.2. Safety equipment is selected and inspected according to procedures.2.3. All defective rigging equipment, associated equipment and safety equipment is isolated, reported and recorded according to procedures.2.4. Communication equipment is selected and inspected for serviceability (where applicable)
3.   Prepare site and equipment. 3.1. Appropriate hazard prevention/control measures are applied to the work area according to procedures.3.2. Ground suitability is inspected and checked (where appropriate).3.3. Site information is reviewed interpreted and communicated to appropriate personnel and appropriate personnel.3.4. All forces and loads associated with erecting and dismantling associated plant are determined in consultation with appropriate personnel.3.5. Safety equipment is fitted and worn correctly (where appropriate).3.6. Rigging equipment and associated plant are positioned for work application and stability according to procedures.3.7. Methods of applying temporary connections using fibre rope are applied according to procedures and the appropriate standard.
4.   Erect structures and plant. 4.1. Associated plant is erected according to procedures and site information.4.2. Stability of associated plant is maintained during erection according to procedures.4.3. Work is conducted safely at heights including safe and effective use of safety equipment.4.4. Appropriate communication methods and communication equipment, are used to co-ordinate the tasks.4.5. Temporary guys, ties, propping and shoring, including flexible steel wire rope, and tubing, are connected where required.4.6. Associated plant and rigging equipment is used according to procedures and the appropriate standard.4.7. Associated equipment is used in a safe and appropriate manner.4.8. The completed task is inspected according to the appropriate standard.4.9. Excess materials are removed from the work area (where applicable)
5.   Dismantle structures and plant. 5.1. Associated plant is dismantled according to procedures and the appropriate standard.5.2. Work is conducted safely at heights including safe and effective use of safety equipment.5.3. Stability of associated plant is maintained during dismantling according to procedures.5.4. Rigging equipment, associated equipment, safety equipment and associated plant are inspected for damage and defects5.5. All defective rigging equipment, associated equipment, associated plant and safety equipment are isolated reported and recorded according to procedures.5.6. Rigging equipment and associated equipment are stored according to procedures and the appropriate standard.5.7. Hazard prevention/control measures are removed (where appropriate)
Worksafe Code
RA
Course & Licence Description
Advanced Rigging
CPCCLRG4001A Licence to perform rigging advanced level This unit is based upon the National Standard for Licensing Persons Performing High Risk Work. This unit in its current form meets state and territory licensing requirements.
Hours to Complete